La Crosse Technology 308-1414B-INT, Wireless Atomic Digital Color Forecast Station with Alerts, Black & 308-1414W Wireless Atomic Digital Color Forecast Station with Alerts, White

★★★★★ 5.0 112 Bewertungen

€47.66
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von www.mieruniszki.pl
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€47.66
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 20.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von www.mieruniszki.pl
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 210737315 Erscheinungsdatum 2026/04/02 Listenpreis €47.66 Modellnummer 210737315
Kategorie

La Crosse Technology 308-1414B-INT, Black 308-1414B Wireless Atomic Digital Color Forecast Station with AlertsFull color display gives you current temperatures & humidity, with a future forecast whether it could be sunny or rainy to snowy. Features accurate, self-set atomic time & date with automatic DST updates. Records min/max values and alerts you of extreme temperatures. Also displays your heat index and dew point. Will indicate of low battery and reception strength. Batteries required (not included.).Weather Station Factory Restart Explanation: The factory restart returns the weather station and outdoor sensor to an ?out-of-the-box? default state and often resolves an issue. Factory Restart: 1. Remove all power (batteries and AC) from outdoor sensor and weather station. 2. Press one of the buttons on the weather station at least 20 times to clear all memory. 3. Verify that the weather station is blank before proceeding (there may be lines painted on the screen that will show when there is no power). 4. Leave both units without power for 15 minutes (very important). 5. Insert the AC power cord into the wall outlet then into the weather station. 6. Insert fresh batteries into the outdoor sensor. 7. Press the TX button on the outdoor sensor to transmit RF signal. 8. Keep the outdoor sensor 5-10 feet from the weather station. 9. When RF connection is established, the temperature will appear on the station. Allow the outdoor sensor and weather station to sit together for 15 minutes to establish a strong connection. 10. Do not press buttons for 15 minutes. For optimum 433MHz transmission, place the outdoor sensor no more than 300 feet (91 meters, open air) from the weather station Explanation: The factory restart returns the weather station and remote sensor to an “out-of-the-box” default state and often resolves an issue. Factory Restart: 1. Remove all power (batteries and AC) from remote sensor and weather station. 2. Press one of the buttons on the weather station at least 20 times to clear all memory. 3. Verify that the weather station is blank before proceeding (there may be lines painted on the screen that will show when there is no power). 4. Leave both units without power for 15 minutes (very important). 5. Insert the AC power cord into the wall outlet then into the weather station. 6. Insert fresh batteries into the remote sensor. 7. Press the TX button on the remote sensor to transmit RF signal. 8. Keep the remote sensor 5-10 feet from the weather station. 9. When RF connection is established, the temperature will appear on the station. Allow the remote sensor and weather station to sit together for 15 minutes to establish a strong connection. 10. Do not press buttons for 15 minutes. • For optimum 433MHz transmission, place the remote sensor no more than 330 feet (100 meters, open air) from the weather station. Note: In Mounting/Positioning Remote sensor First: Place the remote sensor in the desired shaded location and the weather station in the home. Wait approximately 1 hour before permanently mounting the remote sensor to ensure that there is proper reception. POSITION Outdoor: • Protect the remote sensor from standing rain or snow and from the overhead sun, which can cause it to read incorrectly. • Mounting under an eave or deck rail works well. • If you choose, you can construct a small roof or box for the remote sensor. Be sure a box has vents. • Mount the remote sensor on the North side where to prevent sun from causing incorrect readings. • Mount at least 6 feet in the air for a strong RF (radio frequency) signal. • Do not mount the remote sensor on a metal fence. This significantly reduces the effective range. • Remote sensors are water resistant, not waterproofLa Crosse Technology 308-1414W Wireless Atomic Digital Color Forecast Station with Alerts, WhiteFull color display gives you current temperatures & humidity, with a future forecast whether it could be sunny or rainy to snowy. Features accurate, self-set atomic time & date with automatic DST updates. Records min/max values and alerts you of extreme temperatures. Also displays your heat index and dew point. Will indicate of low battery and reception strength. Batteries required (not included). Suggestion: Suggested the following trouble shooting steps, to do a restart, taking the batteries out of both units. Also, make sure the customer is using good alkaline batteries. Then place the display and outside sensor next to each other. Put the batteries in the outside sensor first, then the display secondary without touching any buttons. Then the temperatures should prepopulate on the display and give it an hour to cool down properly from being moved and touched. And it should be reading + or – 2 degrees of each other.Weather Station Factory Restart Explanation: The factory restart returns the weather station and outdoor sensor to an “out-of-the-box” default state and often resolves an issue. Factory Restart: 1. Remove all power (batteries and AC) from outdoor sensor and weather station. 2. Press one of the buttons on the weather station at least 20 times to clear all memory. 3. Verify that the weather station is blank before proceeding (there may be lines painted on the screen that will show when there is no power). 4. Leave both units without power for 15 minutes (very important). 5. Insert the AC power cord into the wall outlet then into the weather station. 6. Insert fresh batteries into the outdoor sensor. 7. Press the TX button on the outdoor sensor to transmit RF signal. 8. Keep the outdoor sensor 5-10 feet from the weather station. 9. When RF connection is established, the temperature will appear on the station. Allow the outdoor sensor and weather station to sit together for 15 minutes to establish a strong connection. 10. Do not press buttons for 15 minutes. For optimum 433MHz transmission, place the outdoor sensor no more than 300 feet (91 meters, open air) from the weather station

  • Product 1: Full color LCD with weather icons: sunny, partly sunny, cloudy, rainy, stormy, snowy
  • Product 1: Atomic self-setting accurate time & date with automatic daylight saving time resets.Outdoor humidity range: 19% to 97% RH. Indoor humidity range: 19% to 97% RH
  • Product 1: Monitors indoor & wireless outdoor temperature (f/c) & humidity (%RH) with recorded min/max values
  • Product 1: Temperature alerts (indoor/outdoor). Display: 5.0V AC adapter for primary power; Requires 3 "AAA" Alkaline batteries for backup (not included)
  • Product 2: Full color LCD with weather icons: sunny, partly sunny, cloudy, rainy, stormy, snowy
  • Product 2: Atomic self-setting accurate time & date with automatic daylight saving time resets
  • Product 2: Monitors indoor & wireless outdoor temperature (f/c) & humidity (%RH) with recorded min/max values. Outdoor temperature range - -40 °F to 140 °F (-40°C to 60°C). Outdoor humidity range - 19% to 97% RH. Transmission range - Up to 300 feet
  • Product 2: Temperature alerts (indoor/outdoor)
Color Black
Shape Rectangular
Brand Name La Crosse Technology
Style Name Station + Station
Display Type LCD
Power Source Battery Powered
Sensor Technology Wireless
Are batteries included No
Connectivity Technology 433 MHz
Upper Temperature Range 140 Degrees Fahrenheit

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

5 von 5
★★★★★
112 Bewertungen | 46 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
90% (101)
4 Sterne
0% (0)
3 Sterne
0% (0)
2 Sterne
0% (0)
1 Stern
10% (11)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.